Exterior

"EIFS" CHECK LIST

Inspect for missing caulk, damaged flashing, or discoloration that may be from moisture. Any cracks in the finish need professional attention.

Examine carefully all areas were there is something protruding from, or attached to the EIFS finish.

Here is a partial list of possible attachments:

Lighting fixtures
Mailboxes
House Numbers
Shutters
Decorative moldings
Railings
Decks
Vents
Utility lines
Gas pipes
Spigots
A/C piping
Outlets

Pay particular attention to the following areas:

Around doors
Around windows
Where EIFS interconnects with the roof
Where chimney caps seals with the EIFS

Any penetration of the EIFS surface by water will severely damage the structure. It can be very difficult to determine if the finish has water behind it. For a positive analysis of the finish have the building inspected by an EIFS inspector using a non invasive moisture meter.

Note: When attaching anything to the exterior, make sure that you or the contractor you hire uses a good quality caulk to seal around the top and sides of the unit and in the hole before the screw is inserted. We recommend using Dow Corning 794/795 sealant.

<Back 

| Welcome to BIS | About BIS | Home Inspections | Get Started  | Technical FAQ | Contact us |